Drain Cleaning for Homes and Properties
A slow or backed-up drain usually means a blockage somewhere in the line. After 30 years servicing Lake Charles and Calcasieu Parish, we know what causes them and how to clear them for good.
Common problems we fix
- Water draining slowly in the sink or tub — Grease, soap scum, and hair build up gradually along pipe walls. The fix is clearing that buildup with the right equipment before the drain stops moving entirely.
- Drain completely stopped up — A full blockage usually sits deeper in the line than a plunger can reach. We locate the clog and clear it without guessing at the cause.
- Multiple drains backing up at once — When more than one fixture backs up at the same time, the blockage is typically in the main sewer line, not an individual branch. That requires clearing the main line, not just the nearest drain.
- Tree roots getting into the drain line — Roots follow moisture and can crack into older clay or cast iron pipes over time. Root intrusion is common in established neighborhoods and needs to be cut out before it causes a full blockage or pipe failure.
What to Check Before You Call
If only one fixture is slow, the clog is likely in the trap or the branch line serving that fixture. Try a plunger first with a firm seal. If that does not move it, or if multiple drains are affected, the blockage is further down the line. Do not use chemical drain cleaners before calling. They can damage older pipes and make the job harder.
How Heavy Rainfall Affects Your Drains
Southwestern Louisiana gets more than 55 inches of rain a year, and tropical systems push that much higher in a short stretch. During heavy rain events, storm runoff can overwhelm older sewer connections and push debris into drain lines. After hurricanes Laura and Delta, we saw a sharp increase in root intrusion and debris blockages throughout Lake Charles and surrounding communities. If your drains were fine before a major storm and slow after, that is usually why.
- Saturated soil shifts pipes and opens joints to root entry
- Flood debris can pack into floor drains and cleanouts
- High water tables slow drain field performance on septic-connected homes
How Drain Cleaning Actually Works
Most drain cleaning starts with a cable machine, also called a snake, which physically breaks up or pulls out the blockage. For stubborn buildup or root intrusion deeper in the line, hydro jetting uses high-pressure water to scour the pipe walls clean. The right method depends on where the clog is, what caused it, and what the pipe is made of.
- Cable machines work best on grease, hair, and soft obstructions
- Hydro jetting clears grease buildup and cuts roots from pipe walls
- Older cast iron and galvanized lines need care to avoid damage during cleaning
Keeping Drains Clear Between Service Calls
Kitchen drains clog faster when grease goes down the sink. Let it cool and throw it in the trash instead. Use a hair catcher on tub and shower drains. Flush floor drains with water a few times a year so the trap does not dry out and let sewer gas back in. For homes on larger lots in areas like Moss Bluff, have trees near your sewer line checked periodically.
How do I know if the clog is in my line or the city sewer?
Can drain cleaning damage my pipes?
Why does my drain keep clogging in the same spot?
Do I need to be home for drain cleaning service?
Book your drain cleaning today
Fast response, upfront pricing, satisfaction guaranteed.